Posted on

Sew a Fabric Gift Basket

With Spring just around the corner, I thought I’d share how to sew a fabric gift basket. These homemade baskets make great gifts for all different occasions, holidays, and themes! I sew these DIY fabric baskets for everything from baby showers to teachers’ gifts and more. Add machine embroidery for a nice custom touch. Use these homemade fabric baskets for custom storage bins as well! Get the tutorial below on how to sew your very own fabric gift basket.

Supplies:

  • FS60X
  • NV180 was used for the embroidery
  • 1 yd. cotton fabric exterior
  • 1 yd. cotton fabric liner
  • 1-2 yds. fusible fleece
  • General sewing/cutting supplies

Cutting:

Exterior: 2 pieces that measure 17” (wide) x  13” long

Liner:  2 pieces that measure 17 x 13”

Fusible Fleece: 4 pieces that measure 17 x 13”

Strap: 1 piece 17 x 6”

Fusible Fleece: 17 x 6”

For the 2 piece (Blue Checkered)

Exterior: Top section: 17 x 3 x  ¾”

Exterior: Bottom section:  17 x 10 ¼”

The rest of the pieces measure the same as above.

Fuse the fusible fleece to the wrong side of all pieces.

Use a grid ruler and mark off a 3” square at the bottom corners for both exterior and liner and cut.

Place exterior and liner pieces right sides together. Stitch the sides and bottoms with a 1/2” seam allowance.

For the corners: With right sides together, connect the seam so it’s centered to the other side and clip or pin.

Stitch together and repeat for all corners. (1/2” seam allowance).

The bottom should look like this when complete.

Now let’s sew the handle.

Fuse the fleece to the wrong side.

Fold the sides into the center and press.

Fold in half so the edges are together and press.

Top stitch down both sides (about 1/8” from the edge).

Find the center front and center back  of the basket and mark. Place the handle right sides together with the basket over those marks and sew (1/4” seam allowance).

Flip the basket so right sides are out including the handle.

Place the basket into the liner so the right sides are together. Attach seams to seams and pin or clip all the way around.

Sew ½” seam allowance all the way around the edge leaving a 3” opening just an inch off one of the handles. This will be the opening to flip right sides outs.

Flip right sides out through the opening.

Press the basket. Top stitch with a 3.0 stitch length and just off the edge (1/8” or so) around the top edge of the basket, closing the opening as well.

Now fill your homemade gift basket with all sorts of goodies. I sew these fabric baskets for gifts, but they’re also great to use as homemade storage bins. You can add some machine embroidery to customize them. For the blue checkered basket, I embroidered the name on the top section. You can use this tutorial here for that portion. I also embroidered a sash to tie around the floral basket. Make these for all different occasions: I love sewing them for party favors, Mother’s Day gifts, and more. Use your imagination and take your homemade gift baskets to the next level of fun.

This article has been republished from Brother Sews USA.

The original article can be seen here: http://blog.brothersews.com/projects/sew-a-fabric-easter-basket/ 

Posted on

Sewing tips and ideas

Sewing Machine:

If you don’t have a sewing machine it’s a good idea to find one that best suits your sewing interests. Do you plan to sew garments, quilts, clothing, or something else entirely? What type of materials do you prefer working with? Are you interested in embroidery? So many options, and Brother has all the different machines to fit your needs. Also feel free to reach out to us ambassadors, we are happy to help!

Use your resources:

If you’re a hands-on learner like me, I suggest you look around your area for sewing studios that offer classes and camps. These are great for everyone! It’s ideal to have a space and time set up to learn without distractions.  I taught sewing for adults, and it was such a great way to learn. Within a week, students went from threading their machines to sewing simple projects (zipper pouches, tote bags, doll clothes).

Another great option is to learn sewing virtually! There are many resources offered online through sewing blogs and sewing websites. Check out Stitching Sewcial, where you’ll find step-by-step sewing tutorials, patterns, and tips to use that range from beginner to expert.

Start small:

It’s a good idea to start with a simple project before diving into a more advanced one. I remember one of my first sewing projects was to pick a pattern and fabric to go with it.  I went with a dress that required all the fixings and on top of that picked a plaid chiffon fabric.  BOTH of these were not “beginner friendly” and I found myself in over my head.  I was 12 and I can remember the frustration I felt when sewing that dress. Perhaps a gathered elastic skirt would have been a better first project at that time.

Consistency is Key:  I like to say “a little each day goes a long way!”  It takes time to hone your skill. Even the busiest of days I try to find 25-30 minutes to give to my craft. Whether it’s browsing a sewing blog for tips on using a cover stitch machine or laying out a sewing pattern and prepping to cut the next day. It surprises people how long even a simple sewing project can take and this is how I like to break it down.

Don’t skip the in between steps: When I first started sewing I would speed through my project like it was a race! I would skip the “annoying steps” I felt were unnecessary like pressing, and pattern markings, etc. These steps are as important as the sewing itself and can be the difference between a wobbly hem and a professional looking garment. While it may not get done as quickly you will see the difference in the overall result.

No rules:

At the end of all of this there are no rules. Have fun and be creative. Sewing is a personal journey after all and you will find your own ways that work for you. Perhaps “that fabric doesn’t work with that pattern” but it never stopped me anyways.

This article has been republished from Brother Sews USA. The original article can be seen here:http://blog.brothersews.com/sewing/national-sewing-month/

Posted on

Get Creative with a Customized Cell Phone Case

Need a little pizazz? Time to get busy and dial in your own cool style with a customized cell phone case!

Supplies:

Note: Smartphone sizes change so quickly, so we recommend basing measurements to the size of your
preferred phone model. This sleeve is supposed to fit very snugly to keep the phone from falling out. If you want to make it larger so it does not fit so tightly (or to accommodate a larger phone in the future), you could add a tab closure to the top.

Steps:

1. Choose 3 different types of fabric—one will serve as the main pocket of your phone case and the 2 layers will be for your cards and earbuds. You will want to cut the main pocket to be twice as wide as your phone (with case if you keep it in a case) plus about 2-3 inches. For example, the phone we used here is 2.5 inches wide, so we cut the fabric to be 8-9 inches wide. The other 2 pocket layers will be 2-3 inches plus your phone size.

2. Cut 3 piece of felt the same size as your phone and pin one to the back of each piece of fabric, with the long edges pinned over. This will add an extra layer of protection.

3. For what will be the 2 smaller front pieces, fold the 2 layers on a diagonal and sew along the top edges. Keep the larger back piece unfolded for now.

4. Sew the two front-pieces along each side at one edge of the back piece. Then, fold over the back piece to
cover the entire case.

5. Sew along the bottom and sides, then cut off any extra fabric from the sides after you’re finished sewing. Turn inside out to reveal!

6. Grab your cards, phone and earbuds. You’re ready to go!